Page 9 - Yasir Plastik Catalog
P. 9
PE100 BORU / PE100 PIPE
PE 100 boru grubu ; TS EN 12201-2+A1 ve ISO 9001:2015 standartlarına uygun olarak, PE100 (Yüksek
yoğunluklu pol et len) hammaddes nden üret lmekted r.
PE100 boruları elektrofüzyon kaynaklı, alınkaynaklı ve kapl n maşon b rleşt rme yöntem olmak üzere
PN4 le PN32 aralığındak anma basınçlarına dayanacak şek lde 20 mm çaptan 450 mm çapa kadar üret m
yapılmaktadır.
PE 100 borularımız kangal hal nde 20 mm çaptan 125 mm çapa kadar, 100 m uzunluğunda müşter
taleb ne göre büyük çaplarda (125 mm – 450 mm) 12-13.5 m uzunluklar hal nde üret lmekted r.
PE 100 pipe group is produced of the raw material of PE100 (High-Density Polyurethane) in accordance
with TS EN 12201-2+A1 and ISO 9001:2015 standards.
The PE100 pipes are produced by means of electrofusion welding, butt-welding and flange coupling sleeve
welding methods, in a way that they resist the nominal pressure, and in diameters between 20 mm and 450 mm.
Our PE 100 pipes in diameters between 20 mm and 125 mm are produced in coils and at the length of
100 m, and the pipes with larger diameters (between 125 mm and 450 mm) are produced based on customer
demands at the lengths between 12 and 13.5 m.
PE100 BORU TEKNİK ÖZELLİKLER
TECHNICAL SPECIFICATIONS OF PE100 PIPES
Özellikler Brm Test Modu Sonuç
Specifications Un t Test Mode Result
Erime Akış Hızı (190 °C, Kg) g/10 dk/m n. ISO 1133-1 0.2-0.6
Melting flow rate (190⁰C, Kg)
Kopma Uzaması % EN ISO 6259 >_ 350
Breaking Strain
H drostat k Ger lme (20 °C) 12 Mpa Saat / Hour ISO 1167-1 >_ 100
Hydrostatic Stress (20⁰C) 12 Mpa
H drostat k Ger lme (80 °C) 5.4 Mpa Saat / Hour ISO 1167-1 >_ 165
Hydrostatic Stress (80⁰C) 5.4 Mpa
H drostat k Ger lme (80 °C) 5 Mpa Saat / Hour ISO 1167-1 >_ 1000
Hydrostatic Stress (80⁰C) 5 Mpa
Oks dasyon İndüks yon Süres dk / m n. EN ISO 11357-6 >_ 20
Oxidation Induction
Boyutsal Değişim % EN ISO 2505 <_ 3
Dimensional Change
İçmesuyu Kalitesine Etkisi Milli Mevzuat Uygun
Its effect on the quality of drinking water - National Legislation Favorable
Yoğunluk g/cm³ EN ISO 1183 >_ 0.930
Density